Sodium‐Naphthalenide‐Driven Synthesis of Base‐Metal Nanoparticles and Follow‐up Reactions

Mo⁰, W⁰, Fe⁰, Ru⁰, Re⁰, and Zn⁰ nanoparticles—essentially base metals—are prepared as a general strategy by a sodium naphthalenide ([NaNaph])‐driven reduction of simple metal chlorides in ethers (1,2‐dimethoxyethane (DME), tetrahydrofuran (THF)). All the nanoparticles have diameters ≤10 nm, and they can be obtained either as powder samples or long‐term stable suspensions. Direct follow‐up reactions (e.g., Mo⁰+S₈, FeCl₃+AsCl₃, ReCl₅+MoCl₅), moreover, allow the preparation of MoS₂, FeAs₂, or Re₄Mo nanoparticles of similar size as the pristine metals (≤10 nm).     

On the Validity of Darcy's Law for Stable High-Concentration Displacements in Granular Porous Media

Recently, it has been suggested that Darcy's Law might not be applicable for modelling miscible, density-dependent flow in porous media. To investigate this, three sets of careful laboratory column experiments were performed on coarse and medium sands, consisting of upward displacement of water by sodium chloride solutions with concentrations ranging from 5 to 200g/l. Data on salt concentrations and water pressures were collected in horizontal transects along the flow direction. Salt concentration data were also collected in the influent and exit lines. The experimental data were analysed using a simplified approach based on Darcy's Law alone, applied with the assumption of a sharp interface. Darcy's Law was used to estimate porous medium permeability by fitting predictions to experimental data. Consistent estimates of permeability were obtained for each set of experiments. The results indicate that Darcy's Law adequately describes high concentration displacements through saturated coarse- and medium-grained porous media.     

LIF技术测量浓度场的影响因素分析

本文研究了作为示踪剂的荧光素钠的谱图，测定了荧光素钠在蒸馏水和普通自来水中的吸光系数，估算了荧光分子的平均寿命。最后，详细分析了浓度、激光功率、温度、ｐＨ值和截止滤光片对荧光强度的影响。     

Molecular chaperone-like properties of sodium caseinate to suppress the pressure-induced aggregation of β-lactoglobulin

ABSTRACT

The objective of this study was to determine whether sodium caseinate can inhibit the aggregation of whey protein induced by pressure treatment. Solutions of β-lactoglobulin (β-Lg, 0.2%, w/v) and mixtures containing 0.2% (w/v) β-Lg and 0–0.5% (w/v) sodium caseinate (NaCas) were pressurized at 400–800?MPa. NaCas suppressed the aggregation of β-Lg induced by pressure treatment, and this function was dependent on the concentration of NaCas. Furthermore, NaCas altered the aggregation process of β-Lg by suppressing the transition of the aggregate from the soluble phase to the insoluble phase and, as a result, the fraction of insoluble aggregates was decreased. During this process, NaCas formed stable complexes with the denatured β-Lg, and the formation of complexes prevented further aggregation of β-Lg. These results indicate that NaCas exhibits a chaperone-like activity under high pressure.     

超临界水中硫酸钠结晶动力学的分子动力学模拟

在超临界水反应器中，硫酸钠是易造成堵塞的一种常见无机盐，研究其结晶动力学对于防盐沉积反应器的设计具有重要意义.本文采用LAMMPS分子动力学模拟软件研究硫酸钠在超临界水中的微观结晶过程，其中水分子采用SPC/E模型，离子-离子、离子-水分子相互作用采用Coulumb和Lennard-Jones联合势能函数.结果表明：水对离子的静电屏蔽作用随温度升高而增强、随密度减小而减弱；增大超临界水的温度和密度有利于离子扩散，进而促进离子相互碰撞、成核；在模拟的超临界水参数范围内，其成核速率的数量级为10²⁹cm^-3·s^-1，生长速率为(19.8~25.8) m·s^-1.     

Ultrasound wave assisted removal of Ceftriaxone sodium in aqueous media with novel nano composite g-C3N4/MWCNT/Bi2WO6 based on CCD-RSM model

The aim of this study was ultrasound assisted removal of Ceftriaxone sodium (CS) based on CCD model. Using sonochemical synthesized Bi₂WO₆ implanted on graphitic carbon nitride/Multiwall carbon nanotube (g-C₃N₄/MWCNT/Bi₂WO₆). For this purpose g-C₃N₄/MWCNT/Bi₂WO₆ was synthesized and characterized using diverse approaches including XRD, FE-SEM, XPS, EDS, HRTEM, FT-IR. Then, the contribution of conventional variables including pH, CS concentration, adsorbent dosage and ultrasound contact time were studied by central composite design (CCD) under response surface methodology (RSM). ANOVA was employed to the variable factors, and the most desirable operational conditions mass provided. Drug adsorption yield of 98.85% obtained under these defined conditions. Through conducting five experiments, the proper prediction of the optimum point were examined. The respective results showed that RSD% was lower than 5% while the t-test confirmed the high quality of fitting. Langmuir isotherm equation fits the experimental data best and the removal followed pseudo-second order kinetics. The estimation of the experimentally obtained maximum adsorption capacities was 19.57 mg.g⁻ of g-C₃N₄/MWCNT/Bi₂WO₆ for CS. Boundary layer diffusion explained the mechanism of removal via intraparticle diffusion.     

Na2S–Carbon Nanotube Fabric Electrodes for Room‐Temperature Sodium–Sulfur Batteries

A unique sodium sulfide (Na₂S) cathode is developed, which will allow the use of sodium‐free anodes for room‐temperature sodium–sulfur (Na–S) batteries. To overcome the “inert” nature of the Na₂S, a special cathode structure is developed by spreading the multi‐walled carbon nanotube (MWCNT)‐wrapped Na₂S particles onto MWCNT fabrics. Spectroscopic and electrochemical analyses reveal a series of polysulfide intermediates involved in the charge/discharge of the cell. The Na–S battery prepared in full discharge state with the Na₂S/MWCNT cathode provides a remarkable capacity of 500 A h kg^?1 (based on sulfur mass) after 50 cycles.     

One-step synthesis ofα,β-unsaturated arylsulfones by a novel multicomponent reaction of aromatic aldehydes,chloroacetonitrile, benzenesulfinic acid sodium salt

A new and green method for the synthesis of α,β-unsaturated arylsulfones had been achieved through the condensation of aromatic aldehydes,chloroacetonitrile,benzenesulfinic acid sodium salt in the presence of l-butyl-3-methyl imidazolium hydroxide([bmim]OH) in EtOH under reflux.The ionic liquid was recovered and recycled for subsequent reactions.The advantages of this protocol were non-toxic,easy work-up and good yields.     

Endohedral Mixed Aggregates: Sodium Alkoxide Cages with Organic or Inorganic Central Anions and Variable Hull

Alkali metal alkoxides are widely used in chemistry due to their Brønsted basic and nucleophilic properties. Potassium alkoxides assist alkyllithium in the metalation of hydrocarbons in Lochmann-Schlosser-bases. Both compounds form mixed aggregates, which enhance the thermal stability, solubility, and the basic reactivity of these mixtures. A very unusual spherical mixed alkoxy aggregate was discovered by Grützmacher et al., where a central dihydrogen phosphide anion is surrounded by a highly dynamic shell of thirteen sodium atoms and a hull of twelve tert-butoxide groups. This structural motif can be reproduced by a reaction of trimethylsilyl compounds of methane, halogens, or pseudo-halogens with excess sodium tert-butoxide. A nucleophilic substitution releases the corresponding anion, which is then encapsulated by the sodium alkoxide units. The compounds are soluble in hydrocarbon solvents, enabling studies of solutions by high-resolution NMR spectroscopy and IR/Raman studies of the crystalline materials.